Sennheiser EM 2000 - 01-09 Instruction Manual page 12

Mounting the antennas to the front of the rack
To mount the antenna connections to the front of the rack when rack mounting the receiver,
you require the GA 3030 AM antenna front mount kit (optional accessory). The GA 3030 AM
consists of:
• 2 BNC extension cables (screw-in BNC socket
• 2 antenna holders
• 4 screws,
• 2 washers
• 2 nuts
1
,
,
.
1
Guide the two BNC connectors
Connect the two BNC connectors
Screw the antenna holders
nuts .
Secure the antenna holders
the supplied screws respectively.
Slide the receiver into the 19" rack.
Putting the receiver into operation
to BNC connector
through the holes in the rack mount "ears"
to the two BNC sockets
to the BNC sockets using the supplied washers
to the rack mount "ears"
),
.
and .
and
of the receiver using two of
11