Sennheiser CC 530 Manual page 6

Wearing the headset
You can wear the headset as usual using its headband
or you can convert it into a clip-phone.
Adjusting the headset's headband and temple pad
D Press the earcup
headband until it locks into place. An audible "click"
should be heard.
E Put the headset on and turn the microphone boom
towards your mouth.
F Adjust the length of the headband so that the ear pad
exerts even, gentle pressure on your ear.
G Adjust the headband so that a snug fit is ensured. If
the headband does not properly fit your head, grasp
the middle part of the headband and carefully bend it.
H The headset features a flexible microphone boom
Bend the microphone boom so that the microphone
is placed at the corner of the mouth. Maintain a
distance of approx. 1 cm between microphone and
mouth.
Wearing the headset as a clip-headset
I Adjust the clip (for the right or left ear) to your ear. To
do so, you can carefully bend the earbow
J Flip the earcup holder
K Press the earcup
locks into place. An audible "click" should be heard.
6
into the earcup holder
away from the earbow
into the earcup holder
on the
.
.
.
until it