Child Lock - Telefunken MG1476C Instructions For Use Manual

If you have a decoder to receive a scrambled channel, the TV set goes into AV when this
channel is being received.
In this case, disconnect the SCART socket from your decoder and call up the
PROGRAM. menu. Select the
and adjust the fine tuning if necessary.
4 . P R O G R A M M E N U M B E R
MENU
Press briefly to select the
Enter an unused programme number
using the remote control.
5 . C H A N N E L N A M E
MENU
Press briefly to move to the
Press briefly. The first dash flashes.
FUNCT VT
Hold down (PR +) : the characters are
PR +
displayed in ascending order.
PR —
Hold down (PR —): the characters are displayed in descending order.
When the character you are looking for is displayed, move on to the next ( + ), or
STOP VT FUNCT VT
preceding dash ( — ).
To insert a space, use the empty character (between ß and A).
6 . S T O R I N G I N M E M O R Y
MENU
Press briefly to select the
Press briefly. The + turns to OK. The channel is
FUNCT VT
stored in memory. One second later, the
line is selected again.
Search for and store all channels for the same standard. Start again for a different
FUNCT VT
standard from SELECTING THE BROADCASTING STANDARD.
TV
Press briefly to remove the menu from the screen.
C H I L D L O C K
You can prevent the use of your television set without the remote control.
The TV set is child locked :
- After the sleep timer function.
- After switching off the TV set by holding down the Stand-By button on the remote
control for more than 4 seconds.
The CHILD LOCK function is indicated by the flashing of the Stand-By light. The television
can only be switched back on using the remote control which cancels the child lock.
line (Fine Tuning), reconnect the SCART socket
line.
Program. No.
line.
Name
line.
Memo
- 14 -
PROGRAM.
CH X X
CC
Program. No. : X X
Name : — — — —
Memo
PROGRAM.
CH X X
CC
Program. No. : X X
Name : — — — —
Memo
PROGRAM.
CH X X
CC
Program. No. : X X
Name : — — — —
Memo
— +
/
+