Table of Contents
Advertisement
FEATURES
CONTROL PANEL FEATURES
15
14
13
Run Time to
Empty (hours)
1. 240-Volt AC, 15-Amp Outlets: Each outlet is
capable of delivering the generator's peak output
of 4,500 Watts (i.e. 18.8 Amps at 240 Volts)
intermittently. Continuous supply from a single
outlet should not exceed 3,600 Watts
(i.e. 15 Amps at 240 Volts).
2.
2-Wire Auto Start Terminals:
remote control feature, connect an external "dry"
(i.e. voltage free) circuit to start the generator by
closing the circuit or stop the generator by
opening the circuit. Devices such as bi-directional
battery power converters as used in stand-alone
off-grid solar power systems can typically output
such a 2-wire start / stop signal to control a
backup generator.
7
1
12
Output Power
Fuel Level
(kW)
(litres)
Figure 4 - iGen4500AS Control Panel Features
To utilise the 2-wire
11
3
10
Output Voltage
(Volts)
3.
Auto Start Control Switch:
the generator's 2-wire remote control function is
activated; the generator can be started and
stopped automatically by closing or opening
an external voltage-free circuit connected to the
2-wire auto start terminals. In the OFF position,
the generator's 2-wire remote control function is
deactivated; the generator can only be started
locally using either the electric or recoil starter.
4.
Auto Start Active Indicator:
light will illuminate whenever the engine control
switch is in the AUTO RUN position and the auto
start control switch is in the ON position. It serves
to caution the user or others that the 2-wire remote
control function is active and the generator may
start or stop automatically without warning.
2
Cumulative
Run Time (hours)
In the ON position,
The green status
6
4
5
7
8
9
Advertisement
Table of Contents
