Using The Appliance For The First Time; Daily Use; Select A Function - Whirlpool OMR35HR0B Manual

USING THE APPLIANCE FOR THE FIRST TIME

A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside it.

DAILY USE

1.

SELECT A FUNCTION

To select a function, turn the selection knob to the
symbol for the function you require.
2.
ACTIVATE A FUNCTION
MANUAL
Turn the selector knob to the required function. The oven
light switches on.
Turn the thermostat knob clockwise to the required
temperature.
At the end of cooking, to switch off the oven, turn the
selection knob and the thermostat knob to
SMART CLEAN
To activate the "Smart Clean" cleaning function, pour
100 - 120 ml of drinking water into the bottom of the
oven, then turn all the 3 knobs (selection knob, timer
knob, thermostat knob) to
The function will activate automatically and its duration is
35'.
.
icon.
Heat the oven to 250 °C for about one hour,
preferably using the "Convection Bake" function. The
oven must be empty during this time.
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the first time.
3.
PREHEATING
Once the function has been activated, the LED
hermostat will switch on signalling that the
preheating process has begun.
At the end of this process, the LED thermostat
switches off indicating that the oven has reached the
set temperature: at this point, place the food inside
and proceed with cooking.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result.
4. SETTING THE TIMER
The timer knob can be used to set a cooking time
of between 1 and 120 minutes. To set cooking time,
after selecting the required cooking function, turn the
knob right round in a clockwise direction and then
turn it back in the opposite direction to the desired
cooking duration. At the end of the set cooking
time the oven switches off and the selector remains
positioned at . To use the oven in manual mode, i.e.
without setting a cooking time, be sure that the timer
knob is turned to the
IMPORTANT: when the timer knob is positioned at
oven will not switch on. To switch the oven on, set the knob
to symbol or set a cooking time.
symbol.
the
3