Table of Contents
Advertisement
Without permission granted by the NCC, any company, enterprise,
or user is not allowed to change frequency, enhance transmitting
power or alter original characteristic as well as performance to a
approved low power radio-frequency devices.
The low power radio-frequency devices shall not influence aircraft
security and interfere legal communications; If found, the user
shall cease operating immediately until no interference is
achieved.
The said legal communications means radio communications is
operated in compliance with the Telecommunications Act. The low
power radio-frequency devices must be susceptible with the inter-
ference from legal communications or ISM radio wave radiated
devices.
1.4 Safe installation
WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.
▶ Connect and operate the appliance only in accordance with the
specifications on the rating plate.
▶ Connect the appliance to a power supply with alternating cur-
rent only via a properly installed socket with earthing.
▶ The protective conductor system of the domestic electrical in-
stallation must be properly installed. The installation must have
a sufficiently large cross section.
▶ When using a residual current circuit breaker, only use a type
with the
▶ Never equip the appliance with an external switching device,
e.g. a timer or remote control.
▶ Never connect the appliance to a circuit that is regularly
switched on and off by the energy supplier.
▶ When the appliance is installed, the mains plug of the power
cord must be freely accessible. If free access is not possible, an
all-pole isolating switch must be installed in the permanent elec-
trical installation according to the installation regulations.
▶ When installing the appliance, check that the power cable is not
trapped or damaged.
mark.
Safety en
5
Advertisement
Table of Contents
