Smeg SA109M-8 Instructions For Use Manual page 40

8.7.2 Setting the cleaning cycle
Turn the function selection knob to select one of the
two cleaning cycles out of
To start
temperature selection knob must be pressed.
will light up to indicate that it is now possible to set
the cycle duration.
Turn the knob right or left to increase or decrease the
duration of the cycle between a minimum of 1h 30m
and a maximum of 3h 00m (apart from the
where the duration is set at 1h 30m).
The text "Piro" will appear on the display to indicate
that the oven is performing the cleaning cycle.
To display the time remaining until the end of the
cleaning cycle, press the temperature selection
knob.
42
Instructions for the user
the cleaning cycle
and .
(pyrolysis), the
cycle
(Function selection knob)
(Temperature knob)
(Temperature knob)
(Temperature knob)