General Warnings And Recommendations - Smeg PL614WH-1 Instruction Manual

Table of Contents

Advertisement

CLEANING THE FILTER UNIT
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE:
PROLONGED DISUSE:
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:
22
User instructions
It is advisable to periodically inspect the centre filter C and, if necessary, to clean it. To remove
the filter, grip the tabs, turn them anticlockwise and lift upwards;
push the centre filter D from the underside to remove it from the micro-filter:
separate the two parts which make up the plastic filter by pressing the body of the filter in the
zone shown by the arrows;
remove the centre filter by lifting it upwards.
The filters should be cleaned under running water using a stiff brush.
It is essential to thoroughly clean the filters according to the above instructions: the
dishwasher cannot function if the filters are clogged.
Carefully replace the filters in their seats, to avoid damaging the wash pump.
Run the soak program twice in succession.
Unplug the power cord from the socket.
Leave the door slightly open, in order to prevent the formation of unpleasant odours inside
the washing tank.
Fill the rinse aid dispenser.
Shut off the water supply tap.
Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the
water to run from the water supply tap for a few minutes.
Plug the power cord back into the socket.
Reconnect the water intake hose and open the tap again.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pl614x-1Sa614w-1Sa614x-1Snz614x

Table of Contents