Table of Contents
Advertisement
03 PRODUCT OVERVIEW
Front
1
LED indicator
1
The LED Indicator flashes, glows, or changes color
depending on the Wireless Speaker's current mode or
status. The color of the LED indicator and the number of
lights indicate the active mode as described below.
LED indicator (W : White, M : Multicolor)
W
W
• The Multicolor LED changes to White, Cyan, Green,
Red, and Blue depending on the mode or status.
(Multi Function) Button
• In standby mode, press the
to turn on the Wireless Speaker.
• Press the
(Multi Function) button to change the
mode. Each time you change the mode, the LED lights
in white and then turns off.
LED indicator
White On → Off
White On → Off
White On → Off
(Volume) Button
Adjusts the volume.
M
W
W
(Multi Function) button
Wi-Fi
Bluetooth
Digital Audio In
(Mic On/Off) Button
Press the button to turn the microphone on or off. When
the microphone is off, the LED indicator will light red.
• To switch to Bluetooth Pairing state in Bluetooth
mode, press and hold the
on the side of the Wireless Speaker for more than
5 seconds.
Rear
D. IN
Connect to the digital (optical) output of an
(OPTICAL)
external device. (See page 14)
SMARTTHINGS
Connect the SmartThings dongle (Purchase
DONGLE
separately) to use the SmartThings Hub
function.
(See page 9)
DC 19V
Connect the AC/DC power adapter. (Power
Supply In) (See page 7)
• When disconnecting the power cable of the AC/DC power adaptor
from a wall outlet, pull the plug.
Do not pull the cable.
• Do not connect this unit or other components to an AC outlet until
all connections between components are complete.
• When you plug in the AC cord, the power button will begin working
in 4 to 6 seconds.
• When you turn on this unit, there will be a 4 to 5 second delay
before it produces sound.
ENG - 6
LED indicator
Red On
(Mic On/Off) button
Mic Off
Mic On
Advertisement
Table of Contents
