Table of Contents
Advertisement
Using the Spacefit sound
Provides optimized sound quality by analyzing the listening spaces.
Method 1. Connecting via Wireless Speaker
1. Run the SmartThings app on your mobile device.
2. Tap Wireless Speaker's card.
3. Enable Spacefit sound.
• This is available in all Sound modes.
Method 2. Connecting via TV
To enable this function, turn on the Adaptive Sound+ mode on your
Samsung TV menu.
(Home (
) → Menu → Settings (
Intelligent Mode Settings → Adaptive Sound+)
• The sound mode on your Wireless Speaker will automatically
change to Adaptive Sound+ if you enable the Adaptive Sound+
mode on your TV.
NOTE
• This function works when the Wireless Speaker connects to some
of the Samsung TVs.
) → All Settings (
) → General →
07 CONNECTING AN
EXTERNAL DEVICE
Connecting using an Optical Cable
Pre-connection Checklist
Make sure both the external device and the Wireless Speaker are
turned off.
BD / DVD player /
Set-top box /
Game console
OPTICAL OUT
LED indicator :
‒ White On → Off
Digital Audio In
1. Use an optical cable (not supplied) to connect the D.IN (OPTICAL)
port of the Wireless Speaker and the optical output port of the
external device. See the figure below.
2. Turn on both the Wireless Speaker and the external device.
3. Press the
(Multi Function) button on the Wireless Speaker
unit and then select the "Digital Audio In" mode. Then the
announcement, "Digital Audio In" is output.
4. The audio signal of the external device will sound from the
Wireless Speaker.
ENG - 15
Wireless Speaker
Optical Cable
(not supplied)
Rear of the
D.IN
(OPTICAL)
Advertisement
Table of Contents
