Table of Contents
Advertisement
9.4.9.
Removal of the 2nd-3rd Direct
Frame
1. Rotate the 2nd-3rd direct frame to align each mark "
2nd-3rd direct frame and both side cam frame, then
remove the 2nd-3rd direct frame.
9.5.
Assembly Procedure for the
Lens (Phase Alignment)
" of
Precaution:
1. Do not remove the MOS unit when disassembling or
reassembling the lens in order to maintain it clean.
When remove it, refer to item "9.7.".
2. Keep dust or dirt away from the lens.
To remove dirt or dust from the lens, blow with dry air.
3. Do not touch the lens surface.
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease (RFKZ0472) as shown on "9.6. The Appli-
cation of Grease Method" in the figure.
9.5.1.
Assembly of the 2nd-3rd Direct
Frame and Both Side Cam Frame
40
Advertisement
Table of Contents
