Drive Select Lever Operation And Reverse Driving - Yamaha VIKING YXM70VDXJ Owner's Manual

starter damage could occur. Wait at least
5 seconds between each operation of the
electric starter to let it cool.
Do not turn the key to the "
with the engine running; otherwise, damage
to the electric starter may result.
TIP
For maximum engine life, never accelerate
hard when the engine is cold!
6
EBU31912
Drive select lever operation and re-
verse driving
ECB02150
NOTICE
Do not shift without coming to a complete
stop and waiting for the engine to return to
normal idle speed. Damage to the engine
or drive train may occur.
Shifting: neutral to high and high to low
1. Stop the vehicle, and take your foot off
the accelerator pedal.
[ECB02140]
" (start) position
6-3
2. Apply the brake pedal, then shift by mov-
ing the drive select lever along the shift
guide. Make sure that the drive select le-
ver is completely shifted into position.
1. Drive select lever
2. L (Low-range)
3. H (High-range)
4. N (Neutral)
5. R (Reverse)
3. Release the parking brake, if applied.
4. Release the brake pedal and press the
accelerator pedal gradually.
2
3
4
5
1