Smeg LSE5304XA Instruction Manual page 9

POWER SWITCH-ON (T
In order to switch on the appliance just turn the ON/OFF selector (2) till it corresponds with the letter I.
POWER SWITCH-ON (T
To switch on the dishwasher press the ON/OFF button (3) to start the program. The PILOT light (4)
will come on.
TABLE FOR CERTIFICATION BODIES
Reference standard
Reference program
Load
Type of detergent
Amount of detergent
Rinse aid setting
DISABLING THE END OF CYCLE ACOUSTIC DEVICE
It is possible to disable the sounding of the start/end of cycle acoustic device.
Proceed as follows:
•
•
•
34
User instructions
YPE
YPE
T "A"
YPE
press down the HALF LOAD (6) button for a few seconds until the symbol bS appears on the
INFORMATION DISPLAY (7);
press the HALF LOAD (6) button again to disable the acoustic device (the symbol bN appears
on the display);
press the START/STOP (5) button twice to exit the set-up mode.
"A")
"B")
EN 50242
T "B"
YPE
EN 50242
(*) Selector on P6
12 place-settings
B
30 g
Depending on the model 3/4 or 4/6