Table of Contents
Advertisement
^Setting the Print Quantity
This feature allows you lo speoify ihe number ol prints (up to
nine) of a frame lo be produced at one time. This is useful as it
saves the trouble of having additional prints made and can be
used to avoid getting prints ol unsuccessful shots,
Note thal you can only set or charge the print quantity for Ihe
frame about lo be shot (next frame) or Ihe frame just shot
(previous frame).
• When you load negative film, the print quantity is
automaticallysettol (P-1).
• When you load reversal film, the print quantity is
automatically set to 0 (P-0).
• Always use Ihe push-button projection on the strap
buckle to push the SELECT, SET and
buttons. (-»13)
Setting the Print Quantity For the Next Frame
Set the print quantity.
• Press the
a
button.
^ Each time you press the
button, the selling changes
sequentially from P-1, lo P-
2,
through to P-9 and then
back to P-0, P-1, etc, (This
cycle begins at P-0 when
reversal film Is used.)
• Hold the Dutton down for 2
seconds or more to cycle
continuously through the
settings.
Take the picture.
^ After you shoot a frame,
the brlnt Quantity
specification reverts to Ihe
default setting of 1 print (0
prints for reversal film).
11-42
Advertisement
Table of Contents
