Table of Contents
Advertisement
iPod/iPhone
iPod/iPhone
Preparation
Ñ
Connectable iPod/iPhone
The following models can be connected to
this unit.
Made for
• iPhone X
• iPhone 8 Plus
• iPhone 8
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
NOTE
• Latest compatible list of iPod/iPhone. For details,
see www.kenwood.com/cs/ce/ipod/.
• By connecting your iPod/iPhone to this unit with
the iPod connection cable KCA-iP103 (optional
accessory), you can supply power to your iPod/
iPhone as well as charge it while playing music.
Note that the power of this unit must be held on.
• If you restart playback after connecting the iPod,
the music that has been played by the iPod is
played first.
24
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPod touch (6th
generation)
• iPod touch (5th
generation)
Ñ
Connect iPod/iPhone
Wired connection
Preparation
• Plug the iPod/iPhone into the USB terminal with
the KCA-iP103 (optional accessory).
• Only one iPod/iPhone can be connected.
1
Connect the iPod/iPhone using the KCA-
iP103.
KCA-iP103 (0.8m)
[1] USB maximum power supply current :
DC 5 V = 1.5 A
2
Touch [
] on any screen.
3
Touch [ALL SRC].
4
Touch [iPod]. (P.11)
● To disconnect the iPod/iPhone connected
with the cable:
1
Detach the iPod/iPhone.
Bluetooth connection
Pair the iPhone through Bluetooth.
Preparation
• To connect an iPhone via Bluetooth, register it
as a Bluetooth device and do the profile setting
for the connection beforehand. See Register the
Bluetooth device (P.28) and Connect the
Bluetooth device (P.29).
USB terminal
[1]
iPod/iPhone
Advertisement
Table of Contents
