Narwal FREO YJCC012 - Robot Vacuum and Mop Manual

Table of Contents

Contents

1 Introduction
2 Product Introduction
3 Use
4 Specifications
5 Important Safety Instructions
6 Documents / Resources
- 6.1 Download manual

Introduction

To ensure the best experience possible, please read this manual and related illustrations carefully before using our product and save it for future reference. Due to continuous updates, the actual product may not be completely consistent with the description in the manual, please refer to the actual product.
In case of any problem during operation, please consult Narwal for after-sales customer services using the following contact information:

Call the Narwal Customer Service Center at 1-866-939-2153 (9:00-18:00 PT);
Chat with customer service on narwal.com or contact us at support@narwal.com;
Scan the QR code below to join Narwal's Facebook group, where you can ask questions, connect with other users, and participate in fun events.
Facebook group

Download app

Scan the QR code below on the right to download the Narwal app in advance, get familiar with more functions and enjoy a more convenient smart life.
Wish you happy cleaning with Narwal!

Product Introduction

Package Contents
Main Units

Accessories

Product Overview
Base station
Product Overview - Base station - Part 1

Robot
Product Overview - Robot - Part 3

Side
Product Overview - Side - Part 4

Bottom
Product Overview - Bottom - Part 5

Dustbox
Product Overview - Dustbox - Part 6

Control Panel Overview
Robot Control Panel
Control Panel Overview - Robot Control Panel

Button/indicator light	Operations and Functions
Ring button	Click: Clean the whole house Press and hold the button for 3 seconds: Power on/off
Ring indicator light	Solid white indicator: The device is powered on/drying/charging White breathing light: Standby Blue breathing light: Networking Solid purple indicator: Task in progress Purple breathing light: Task is paused Red breathing light: Error
Reset button	Press and hold the button for 5s to reset the robot

Standby Mode

Click the Standby Mode.
Click "Confirm".
Enter Standby Mode.

Use

Notices
This product is only used to clean floors in household environments, and cannot be used outdoors (such as open balconies), areas other than floors (such as sofas or window sills), high places, or commercial/industrial environments.

Do not use in areas with steep drop-offs (such as lofts or top of furniture) without guardrails
Do not place any objects (including human bodies or pets) on stationary or moving robots.
To prevent personal injury, when the product is running, do not put hair, fingers, etc. near the mop, side brush, Lidar sensor, vacuum inlet or cleaning fins
Do not allow the robot to vacuum up hard or sharp objects
To prevent damages to the device, do not place the robot near any heat or water sources (such as radiators or faucets).

Other Notices

To prevent damages to the robot, do not run the robot with the top cover opened.
To lift the robot, grasp the left and right sides of the body with both hands and lift it perpendicularly to the floor.
To prevent the robot from falling, do not lift the base station when the robot is inside it.
People with physical, mental, or sensory impairments (including children) should use or operate this product under the supervision or guidance of their guardians.
The robot is not a toy. Keep a close eye on children and pets when the product is running, and keep them away from it as much as possible.
Do not place accessories such as the Floor Cleaner and mopping modules in areas accessible to children.
Do not place the product packaging (bags, foam, etc.) of this product in areas accessible to children.
Do not use the robot to clean long pile carpets.
Do not use the robot to clean any burning objects (such as cigarette butts).
Clean and maintain the robot and base station with the power supply turned off and the power plug removed.
Do not wipe any part of the robot with a damp cloth or any liquid.
Do not use any battery, charger, or charging base manufactured by third parties.
Do not disassemble, repair, or modify the robot, base station, or battery without permission.
Do not throw away or store waste batteries without authorization. Hand them over to professional recycling agencies.
When this product is to be discarded, the battery must be removed. Before removal, ensure that the robot is turned off.
If the power cord is damaged or broken, stop using the robot immediately and contact our customer service department.
To transport the robot, make sure that it is turned off. It is recommended to transport it in the original packaging.
It is hazardous for the rotating brush to touch the power cord. Arrange the wires neatly before use.
To prevent the floor from being scratched, ensure that there is no sharp large-grained gravel or sharp objects on the floor when mopping.

Specifications

Robot	Base station
Dimensions: 350351.5106 mm	Dimensions: 370415435mm
Color: White	Color: White
Weight: Approx. 4.35kg	Weight: Approx. 8.75kg
Battery: ≥5000mAh	Rated input: 100-240V~
Rated voltage: 14.4V	Rated output: 20V 3.0A
Rated power: 45W	Rated frequency: 50/60Hz
	Rated power: 72W

Important Safety Instructions

When using an electrical robot, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

To reduce the risk of injury or damage, read the following safety precautions before setting up, operating, and maintaining your robot.

To reduce the risk of fire, electric shock, or injury:

Do not leave the appliance unattended when plugged in. Unplug it from the power outlet when not in use and before servicing.
This appliance is provided with double insulation. Use only genuine replacement parts. See instructions for Servicing of Double-Insulated Appliances.
SERVICING OF DOUBLE-INSULATED APPLIANCES
A double-insulated appliance is marked with one or more of the following: The words DOUBLE INSULATION or DOUBLE INSULATED' or the double insulation symbol (square within a square).
In a double-insulated appliance, two insulation systems of are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they replace.

General

Do not use the robot asa toy. Small children, pets and the elderly should be supervised when your robot is operating
Do not sit, stand or place any object on your robot or the base station
Only use as instructed in this manual.
Only use accessories recommended or sold by the manufacturer.
Your robot is not water-proof. Do not spray or pour liquids on your robot. If liquid spills on your robot, dry immediately.
For INDOOR use ONLY. Do not use your robot in outdoor, commercial or industrial environments. Do not use your robot on wet surfaces or surfaces with standing water.
Do not use your robot or base station if it is damaged, is not working properly, has been dropped, left outdoors, or come into contact with water. The robot must be repaired by the manufacturer or its authorized service agent.
Do not use with damaged cord or plug.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Turn off all controls before unplugging

To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only NARWAL cleaning fluid intended for use with this appliance. See the Cleaning Fluid section of this manual.
Place the cords from other appliances out of the area to be cleaned.
Do not operate the vacuum in an area where there are lit candles or fragile objects on the floor to be cleaned.
Do not allow children to sit on the vacuum.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of ba ery pack may create a risk of fire when used with another ba ery pack.
Under abusive conditions, liquid may be ejected from the ba ery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the ba ery may cause irritation or burns.
Do not use a ba ery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not expose an appliance to fire or excessive temperature.
Follow all charging instructions and do not charge the ba ery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the ba ery and increase the risk of fire.
Only used with base station (Model: YJCB012) for charging the application.
Do not use and store your robot in extremely hot or cold environments. Do not operate your robot below 0°C/32°F or above 35°C/95°F. Do not store your robot below -20C/-4°F or above 70°C/158°F. Charge your robot at a temperature between 5°C/41°F and 30C/86°F. Keep your robot away from fire or places with temperatures higher than 130°C/266°F. Otherwise, your robot may explode.
Keep the front side of your robot facing upward at all times when transporting, moving, or operating your robot, or replacing any component for it. Your robot may be damaged if turned upside down.
Do not expose your robot to direct sunlight.

Operating your Robot

Do not handle the plug or your robot with wet hands.
Ensure clearance of 1 meter / 3 feet for a 180° range in front of the base station.
Before using your robot, pick up objects on the floor, including clothing, scrap papers, cords for blinds or curtains, power cords, and any fragile objects. If your robot passes over a cord and drags, it, there is a chance an object could be pulled off a table or shelf. Ensure that no sharp objects, such as blades, scissors, or screwdrivers, are in the cleaning area
Remove lit candles and fragile items from the top of furniture before operating your robot Your robot may hit or bump into the furniture and knock off items on top.
Ensure that your robot will operate on indoor flat floors and that there are no stairs or barriers higher than 15 mm / 0.Sinch in areas to be cleaned. If there is a cliff edge in the cleaning area due to a step or stairs, you should operate your robot to ensure that it can detect the step without falling over the edge, or specify a no-go area by placing a magnetic strip provided by the manufacturer or build a physical barrier of no lower than 25 mm / 1 inch so as to prevent the robot from falling. Make sure the physical barrier is nota trip hazard
The robot will move around automatically. Therefore, watch your step in the operation areas of the robot toavoid stepping on it. Take care of babies, children, pets, the blind and the elderly if they are near a operating robot. Never operate your robot in a room where an infant or childis sleeping
Ensure network access in the room so that you can view your robot working status through the APP on your phone.
Do not move the robot randomly because it will result in positioning failure of the robot. If you move items in the cleaning area after map creation, such as couch, end table, or dinning table, your robot may create a map again, which is normal
Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.
Do not allow your robot to clean large objects like stones, large pieces of paper or any item that may clog your robot.
Your robot may get blocked by objects. Please turn off the power and then manually remove the obstacle,
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
Do not use your robot to pick up flammable or combustible materials, such as gasoline, printer or copier toner, or use in areas where they may be present
Do not use your robot to clean anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
Do not use your robot in explosive or volatile areas or areas easy to leak or collect static electricity, such as a gas station.
Anytime you encounter a liquid leak, stop using your robot, turn off the power, and contact after-sales.
In cleaning mode, add detergent specified by the manufacturer to the clean water tank Non-designated detergent may cause damage to your robot.
During and after mopping, the fioor will be wet. Be careful to avoid slipping
When using the mopping function, it is normal for overflowed water to be gathered the base station Clean the excess water with a dry towel.
After mopping, the base station will dry the mop. During this process, do not pull out the plug or disconnect power to the base station.
Do not leave appliance unattended when plugged in. Unplug it from the power outlet when not in use and before servicing
Use extra care when cleaning on stairs.

Use extra care when cleaning on stairs.
Do not use your robot without dust bag and/or filters in place.
Prevent unintentional starting. Ensure the switch is in the o -position before connecting to the ba ery pack, picking up or carrying the appliance. Please do not touch the power switch when holding the robot or the base station. Please do not hold the robot or the base station while they are charging.
Disconnect the ba ery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
To maintain product safety, service must only be performed by a qualified repair person using identical replacement parts.

SAVE THESE INSTRUCTIONS

Cleaning and Maintenance

Turn off the power before cleaning or maintaining your robot.
Considering the limited capacity of the dust bin and water tank, empty the dust bin and water tank as soon as possible after hearing the alert.
When not using the base station for a long period of time, please unplug it.
Do not attempt to repair your robot or the battery pack, except as indicated in the instructions for use and care.
Do not disassemble or modify your robot or alter the software by yourself. Only authorized maintenance personnel can replace faulty components to ensure device safety.
Do not use a wet cloth or any liquid to wipe any part of the robot body.
Vacuuming operation may cause the side brush to be tangled by hair or fur, and cleaning operation will result in wastewater in water tank. Clean the side brush and water tank after operation. Keep the water level below the Max mark on the tank so as to prevent overflowing and damaging your robot.
Do not incinerate your robot even if it is severely damaged. The batteries can explode in a fire.
Do not dispose your robot as an unclassified waste. Contact your local regulative department for information about recycling and disposal. If your robot is buried in a landfill or wasteyard, hazardous substances may leak into underground water and enter the food chain, which harms health and well-being. For more information about waste collection and recycling, contact your local sanitation department

Battery, Power Cord and Charging Warnings

Use only 100 V AC-240 VAC input power as required by the manufacturer. Otherwise, your robot may be damaged
Using your robot's battery improperly may result in fire or explosion. Do not heat, disassemble, puncture, or destroy your robot or its battery, nor incinerate them:
Do not charge your robot for a prolonged time, otherwise, the battery may be damaged
Before every use, check the battery pack for any signs of damage or leakage. Do not charge damaged or leaking battery packs. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may manifest unpredictable behavior resulting in fire, explosion and risk of injury.
Under extreme conditions, liquid may be ejected from the battery; please avoid contact. If contact accidentally occurs, rinse the contact area with water. Ifthe liquid contacts eyes, immediately seek medical help. Liquid ejected from the battery may cause irritation or burns.
Use your robot only with specifically designated battery packs. Using any other battery packs may pose a risk of injury and fire.
Take care not to damage the power cord. Do not pull on or carry your robot or base station by the power cord, use the power cord as a handle, close a door on the power cord, or pull power cord around sharp edges or corners
Do not touch the connector of the power cord with wet fingers
Do not run your robot over the power cord.
Keep the power cord away from hot surfaces.
Tum offall controls before unplugging. Do not unplug by pulling on the power cord. To unplug, the appliance properly grasp the plug, not the cord.
Do not use the power cord if it is damaged. Power cord must be replaced by the manufacturer or its authorized service agent avoid hazards.
When the battery packs not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails, screws or other small metal objects, that can Short the battery terminals may cause burns or a fire.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used on another type of battery pack.