Advertisement
Quick Links
Advertisement
Related Manuals for Narwal YJCC012
Summary of Contents for Narwal YJCC012
- Page 1 User’s Manual Narwal FREO Robot Vacuum and Mop Model: YJCC012...
-
Page 2: Table Of Contents
Before Use First Use Manual electronic copy Scan the QR code below on the right to download the Narwal app in advance, get familiar with Detailed Explanation of Manual electronic copy more functions and enjoy a more convenient smart life. - Page 3 To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only following : READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE NARWAL cleaning fluid intended for use with this appliance. See the Cleaning Fluid section of this manual.
- Page 4 scrap be gathered • Do not leave appliance una ended when plugged in. Unplug it from the power outlet when not in use and before servicing. cli edge • Use extra care when cleaning on stairs. • Do not use your robot without dust bag and/or filters in place. •...
- Page 5 The laser distance sensor of this product meets the standards for Class I Laser Products in IEC 60825-1: 2014 and will not generate hazardous laser radiation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
-
Page 6: Product Introduction
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Product Introduction This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 7: Product Overview
Product Overview Base station Automatic cleaner feeding slot Power jack Dirty water level indicator float Base station Water tank handles touchscreen Picking cavities of the base station Speaker Clean water tank Dirty water Base station cleaning tank latch components Dirty water tank Cleaning tray Cleaning base... - Page 8 Robot Bottom Cliff sensor Reset button Carpet sensor Cleaning hook Cover Cliff sensor Roller brush Vacuum inlet Tire Tire Cliff sensor Cliff sensor Infrared sensor Omni-directional wheel Bumper Side Dustbox Pressure sensing Filter cover radar cover Operation button Filter handle Filter Picking cavity Charging-electrode...
-
Page 9: Control Panel Overview
Control Panel Overview Standby Mode Robot Control Panel 1. Click the Standby Mode. 2. Click "Confirm" . Button/indicator light Operations and Functions Click: Clean the whole house Ring button Press and hold the button for 3 seconds: Power on/off Ring indicator light Solid white indicator: The device is 3. -
Page 10: Notices
Notices This product is only used to clean floors in household environments, and cannot be used 5. To prevent damages to the device, do not place outdoors (such as open balconies), areas other than floors (such as sofas or window sills), the robot near any heat or water sources (such as high places, or commercial/industrial environments. -
Page 11: Before Use
22. To transport the robot, make sure that it is turned off. It is recommended to transport it in the original packaging. 23. It is hazardous for the rotating brush to touch the power cord. Arrange the wires neatly before use. 24.