Table of Contents
Advertisement
en Microwave
Not microwave-safe
Cookware
Metal cookware
Cookware with gold or sil-
ver decoration
7.3 Testing cookware for microwave
suitability
Test cookware to see whether it is suitable for mi-
crowave use. Testing cookware is the only time the ap-
pliance should be operated in microwave mode without
any food inside.
WARNING ‒ Risk of scalding!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
▶
Keep children at a safe distance.
▶
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to the maximum microwave power
2.
setting for 30 seconds to 1 minute.
Start the operation.
3.
Check the cookware several times:
4.
– If the cookware is cold or warm to the touch, it is
suitable for microwave use.
– If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
7.4 QuickStart
Press
.
1.
Use
to start the operation.
2.
a The preset microwave output is started for 1 minute.
Note: You can change the presetting for the microwave
output in the basic settings. → Page 14
7.5 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ Follow the safety instructions. → Page 4
¡ Observe the instructions on how to prevent material
damage. → Page 6
¡ Observe the information on microwave-safe cook-
ware and accessories.
Press "Microwave" in the menu.
1.
Or select the microwave directly using the touch
‒
field
.
Press the microwave output in watts.
2.
Use the setting ring to set the microwave output.
3.
To confirm the microwave output, press
4.
display
Press
"Cooking time".
5.
10
Reason
Metal does not allow mi-
crowaves to pass
through. The food hardly
heats up.
Microwaves can damage
gold and silver decora-
tion.
Tip: You can only use this
kind of cookware if the
manufacturer guarantees
that it is microwave-safe.
on the
A cooking time must always be set to operate the
microwave.
To change the preset cooking time, press the relev-
6.
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
Use the setting ring to set the cooking time.
7.
If required, use
to reset the setting value.
To confirm the set cooking time, press
8.
play.
Press
to start the operation.
9.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "boost".
a When the time has elapsed, a signal tone sounds. A
notification appears on the display confirming that
the operation has finished.
Once the cooking time has elapsed:
10.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Dry the cooking compartment.
11.
Tip: To ensure optimum use of your appliance, refer to
the information in the recommended settings.
→ "How it works", Page 18
7.6 Changing the microwave output
You can change the microwave output setting during
operation.
Press
.
1.
Press the set microwave output setting.
2.
Use the setting ring to set the microwave output.
3.
Press
.
4.
7.7 Changing the cooking time
Press
.
1.
Press the set "Cooking time".
2.
To change the preset cooking time, press the relev-
3.
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
Use the setting ring to set the cooking time.
4.
If required, use
to reset the setting value.
Press
.
5.
7.8 Extending the cooking time
Once the cooking time has elapsed, you can continue
cooking the food.
Press "Add extra cooking time".
1.
Set the required cooking time.
2.
→ "Setting the cooking time", Page 12
You can reset the set cooking time using
Press
.
3.
Use
to start the operation.
4.
7.9 Pausing the operation
Open the appliance door or press
1.
a Operation is paused.
To continue operation, close the appliance door and
2.
press
.
a Operation continues.
on the dis-
to switch the ap-
.
.
Advertisement
Table of Contents
