Programme Selection And Special Features - Hoover H-DISH 500 HF 6C2F0PX-80 Manual

15. PROGRAMME SELECTION
AND SPECIAL FEATURES
ON/OFF button
To turn the appliance on and off, press

the ON/OFF button.
First time you switch on the
appliance
Connect the machine to the power supply.

Press the "ON/OFF"

In this phase, only the "PROGRAMME
SELECTION" and
buttons will remain active.
The "SET LANGUAGE" message will

appear on the display, followed by,
"ENGLISH".
By pressing

SELECTION"
select the preferred language.
To accept the choice of language, press

the "START/RESET"
Immediately after,
message will appear on the display and
the lights will all be off.
The pre-set "ECO" programme will

appear on the display.
To adapt the wash cycle to the type of

dirty dishes, choose the appropriate
programme by
"PROGRAMME SELECTION"
Select the washing options if necessary.

Press the "START/RESET"

WARNING:
In the event that the machine remains
switched on without selecting or
starting any programme, the dishwasher
will switch off automatically after 5
minutes.
button.
"START/RESET"
"PROGRAMME
the
button you can
button.
the "WELCOME"
selecting the
buttons.
button.
Next time you switch on the
appliance
Hold down the ON/OFF button to turn the
machine on and the "ECO" programme, or
the programme you have decided to use,
will appear on the display, saving it when
the dishwasher is switched on, (to save the
programme, see the "SETTINGS menu" in
the specific "MEMO FUNCTION" section).
"AUTOMATIC" programmes
Models with Smart Loading Sensor
The "AUTO
automatically sets the ideal temperature
and washing time, optimising water and
electricity consumption,
algorithm that
dirtiness of the dishes.
Models with dirt sensor
(Only on some models).
The dishwasher is equipped with a dirt
sensor, capable
murkiness
programme phases (see programme
list). This device automatically adapts the
wash cycle parameters to the actual
quantity of dirt on the dishes, since water
murkiness is linked to the quantity of dirt on
the dishes. Thus, excellent washing results
two
are guaranteed while optimising water and
energy consumption.
"IMPULSE" or "INTERMITTENT"
programmes (only on some
models)
Some programmes use an impulse or
intermittent washing system (depending on
the model), which reduces consumption,
noise and improves performance.
28
CARE" programme
thanks
analyses the
of analysing
during all "AUTOMATIC"
to an
real-time
water