Improving Print Quality - Epson C11CA88001A1 User Manual

150 | Solving Problems
Message
SPECTROPROOFER ERROR
REFER TO THE MANUAL
AND CONNECT THE ILS20EP
TO SPECTROPROOFER
TURN THE POWER OFF,
AND THEN ON AGAIN
WRONG SUPPORT
POSITION
LOWER THE PAPER EJECT
SUPPORT
WRONG SUPPORT
POSITION
RAISE THE PAPER EJECT
SUPPORT
Explanation
There is an error with the
optional SpectroProofer.
The paper eject support is in
the wrong position.
The paper eject support is in
the wrong position.

Improving Print Quality

You can often improve print quality by doing the following:
Run a nozzle check and cleaning cycle. See page 118 for instructions.
•
Align the print head. See page 123 for instructions.
•
When you send a print job, make sure your print options are set
•
correctly. For more information, see page 59 (Windows) or page 87
(Mac).
150
Response
Refer to the SpectroProfer User's Guide for
additional information.
Lower the paper eject support.
Raise the paper eject support.