Supplying Power - Quasar Palmcorder PalmSigh VM-L450 Operating Instructions Manual

Supplying Power
FACAdaptora
DC Power Cable
DC IN 1 Connect AC Adaptor VCR DC OUT
to Camcorder DC IN with supplied
POWER L
Së Connector DC Power Cable.
Plug in AC Adaptor.
2 POWER Lamp lights.
Notes:
* AC Adaptor cannot power Camcorder while
charging Battery.
¢ When not in use, unplug AC Adaptor from AC
outlet. (Adaptor uses 1.2 W of electricity while
plugged in.)
CAUTION:
This unit will operate on 110/120/220/240 V AC. An AC plug adaptor may be
required for voltages other than 120 V AC. Please contact either a local or foreign
electrical parts distributor for assistance in selecting an alternate AC plug.
We recommend using the accessory power plug adaptor (VJSS0070) in an area
which has special AC outlets.
'Car: ENCINAS AO PUED)
=b
Connect PV-C16 Car Battery Cord
(optional) to Camcorder DC IN.
2 A Start engine first.
B Plug Car Battery Cord into
Cigarette lighter socket.
* |f Car Battery cord fuse needs
replacing, use exact current rating
(in amps).
Cigarette Lighter Notes:
Socket (12 V) * This cord only works in vehicles equipped
een with DC 12 V (negative ground) battery.
Check with your car/truck dealer. Use
only specified car battery cord.
* To avoid blowing the car battery cord
fuse, do step 2 in the proper order.
* Running vehicles must be well ventilated.
Car Battery Cord Cigarette * When not in use, disconnect cigarette
(optional) Lighter Plug lighter plug.
11