Table of Contents
Advertisement
MANUAL
FOCUS
"Manual Focus
Use Manual Focus (MF) when
* recording through glass.
* lighting is poor.
e subject is far away with objects in foreground.
* subject has distinct horizontal lines.
Macro Focus (close-ups)
"eet.
DRO
Before
you begin...
e Connect Camcorder to power source.
e Set POWER to CAMERA.
Camcorder automatically focuses on
subject even during zooming.
Auto Focus is on when "MET is not
displayed in EVF or LCD monitor. Push
MANUAL
FOCUS to remove "MF" in EVF
or LCD monitor if necessary.
e subject is not centered in EVF or LCD monitor.
s subject has shiny surface.
* subject is slanted.
* subject is bright and flat, like a white wall.
e subject has fast motion, like a golf swing.
1
Push MANUAL FOCUS so "MP"
(Manual Focus) appears in EVF or
LCD monitor. ` eye or LCD Monitor
Hold down
"T" (telephoto) on
POWER ZOOM to maximum zoom
in.
Turn MANUAL
FOCUS until
subject is in focus.
+ Back away from subject if necessary.
4
Hold down "W" (wide angle) on
POWER ZOOM as desired.
es Refocus as needed
when aiming at new scenes.
Auto Focus functions up to 12.7 mm (1/2 inch) from subject.
Hold down "W" on POWER ZOOM to maximum wide angle.
Bring Camcorder up close to the subject.
30
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
