Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.
Safety, performance, and dependability have been given ■ Do not expose power tools to rain or wet conditions. top priority in the design of your stapler. Water entering a power tool will increase the risk of electric shock. INTENDED USE ■...
Do not use the power tool if the switch does not turn ■ temperature above 130’C may cause explosion. it on and off. Any power tool that cannot be controlled ■ Follow all charging instructions and do not charge with the switch is dangerous and must be repaired. the battery pack or tool outside the temperature ■...
■ Keep hands and body parts clear of immediate work ADDITIONAL SAFETY WARNINGS area. Hold workpiece with clamps when necessary to keep hands and body out of potential harm. Be sure the workpiece is properly secured before pressing the WARNING fastener against the material.
Do not use lubricants on staplers, magazine or driving RISK REDUCTION mechanism. Keep clean. It has been reported that vibrations from handheld tools may contribute to a condition called Raynaud’s Syndrome ENVIRONMENTAL PROTECTION in certain individuals. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent Recycle raw materials instead of disposing upon exposure to cold.
Page 7
CAUTION (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trademark of Ryobi Limited, and is used under license. 961075513-03...