Fastening The Cables - Dukane ImagePro 8981 User Manual

Fastening the cables

Remove the screw located on the lower side of HDMI connector and use it to
attach the HDMI cable holder.
It is recommended to fasten the HDMI cables by using the HDMI cable holder and
the Cable tie to prevent them from coming off. Use a Cable tie with the size of 2.0
x 4.0mm or smaller.
No cable tie
HDMI cable
holder
WARNING
CAUTION
with the size of 2.0 x 4.0mm or smaller.
cables and tie holder.
►Do not bind the cables too tightly. The cables or the hole might be damaged.
►Do not fasten the cables other than HDMI.
►To fasten the cable, use a supplied Cable tie or plastic tie
screw
A metallic tie may cause damage to the
Setting up
With cable tie
cable tie
23