Smeg FD240AP Operating Instructions Manual page 9

7. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet. Transfer
the lower door to the property position. Secure the door's level, make the bottom
hinge pin into the lower hole of the door, then tight the bolts.
8.
Make the middle hinge reverse the direction 180 degree, then transfer it to the left
property position. Make the middle hinge pin in the upper hole of the lower door, then
tight the bolts. Transfer the upper door to the property position. Secure the door's
level; make the middle hinge pin into the lower hole of the upper door.
9.
Unscrew and remove the top hinge pin, turn the bracket over and replace it.
Tighten securely.
8