Smeg DWI612C Instruction Manual page 9

SETTING THE WASHING PROGRAM AND SWITCHING ON
To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most
appropriate program according to dish type and degree of soiling.
After using the table to identify the most appropriate washing program:
•
press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;
•
keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired
program illuminates;
•
close the door; the machine will automatically begin the washing program after the sounding of the acoustic
device.
PROGRAMME,
NUMBER & SYMBOL
Pans and dishes awaiting a further
1
SOAK
wash
Wash immediately after use for
2
DELICATE
dishes with light dirt
BIO (*) Wash immediately after use for
3
EN 50242 dishes with normal dirt
4
NORMAL Dishes with normal dirt
Very dirty pans and dishes (except
5
INTENSIVE
delicate items)
TABLE OF PROGRAMS
LOAD PROGRAM
CROCKERY AND CUTLERY PROGRESS
Cold prewash
Wash at 45°C
Cold rinse
Rinse at 67°C
Dry
Wash at 55°C
Cold rinse
Rinse at 67°C
Dry
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 67°C
Dry
Prewash at 45°C
Wash at 67°C
2 cold rinses
Rinse at 70°C
Dry
DURATION CONSUMPTION
MINUTES WATER POWER
(2) LITRES (1) KWh (2)
_
8' 4
60' 13 1,10
110' 15 1,24
100' 18 1,40
110' 22 1,65
Only run the soak program with half loads.
The HALF LOAD option (6) is available for all programs
except the soak program.
(*) Reference program as EN 50242 standard.
–
( ) Not present.
(1) Average power consumption with the softener set on
level 2.
(2) The cycle duration and power consumption may vary
according to the water and room temperatures, and
the type and amount of dishes.
The washing cycle will not take place if the
dishwasher door is left open or not properly
closed.
For any other information about use and
maintenance of the dishwasher, read the
enclosed manual carefully.
19 592 0022 00