Smeg DWI612C Instruction Manual page 12

User instructions
ADJUSTING THE WATER SOFTENING SYSTEM
The dishwasher is equipped with an device for the user to adjust the water softening system
according to the hardness of the water supply.
According to the machine model, the selector which acts on the adjustment may be located:
inside the plastic locking ring located on the right-hand side, inside the dishwasher;
•
inside the water softener, just below the cap.
•
Both allow for adjustment to 5 settings:
WATER HARDNESS TABLE
WATER HARDNESS
German Degrees (°dH)
0 - 4
5 - 9
10 - 22
23 - 29
30 - 35
36 - 41
Contact your local water board for information on the hardness of your water supply.
French Degrees (°dF)
0 - 7
8 - 15
16 - 37
38 - 50
51 - 60
61 - 70
SETTING
Setting N. 1 NO SALT
Setting N. 1
Setting N. 2
Setting N. 3
Setting N. 4
Setting N. 5
31