Smeg DWI612C Instruction Manual page 8

CANCELLING THE CURRENT PROGRAM
•
To cancel the currently selected program, open the door and hold down the
PROGRAM SELECTION (3) button for a few seconds until the indicator lights for
programs 4 and 5 illuminate simultaneously.
• Close the door.
• After approximately 1 minute the dishwasher will advance to the end of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a new program.
When the door is closed the dishwasher will automatically select the new program.
END OF CYCLE
At the end of the washing cycle, a brief acoustic device is sounded and the indicator
light for the program which has just ended blinks.
To switch off the dishwasher, open the door and press the ON/OFF button (1).
If it is necessary to open dishwasher door during the washing cycle, there
will be a 1-minute delay before the program can be resumed.
After correctly closing the door, the washing program will start again from
where it was interrupted. This operation may negatively affective the
progress of the washing cycle.
TABLE FOR CERTIFICATION BODIES
Reference standard
Reference program
Load
Type of detergent
Amount of detergent
Rinse aid setting
EN 50242 STANDARD LOADS
LOWER BASKET
Depending on models, the cutlery basket may have removable grilles in which the
cutlery can be inserted to keep the items far enough apart and allow optimal water
passage.
EN 50242
BIO
12 place-settings
B
30 g
Depending on the model 3/4 or 4/6
UPPER BASKET