Smeg DI612CT Instruction Manual page 16

PROGRAMME
LOAD CROCKERY AND
NUMBER
& SYMBOL
1 SOAK
Pans and dishes awaiting
2 LIGHT
Delicate dishes with light
3 ECO (*)
Dishes with normal dirt,
EN 50242
4 HALF LOAD
Half load of dishes with
IEC/DIN
5 ULTRA
CLEAN
dishes, even with dried-on
***
Reference program as per EN 50242 standard. ** See energy label.
*
*** Reference program for laboratories: Detergent: 20g in the dispenser + 10g in the
door or tablet. Configuration: see photo in "Using the baskets".
Only run the soak program with partial loads.
The ULTRA CLEAN program terminate with an extra anti-bacteria rinse that ensures a further
reduction in the bacteria level. If the temperature falls during this stage of the program (e.g.
because the door is opened or due to a power blackout), the program lights flash to warn that
the anti-bacteria effect is not guaranteed.
(1) The cycle duration and power consumption may vary according to the water and
room temperatures, and the type and amount of dishes.
(2) Average power consumption with the softener set on level 2.
(3) Some models feature an intermediate rinse.
(4) 1 or 2 cold rinses depending on the model.
If the dishwasher door is open or not properly closed, the washing cycle
will not start.
14
User instructions
PROGRAMS TABLE
CUTLERY
completion of the load
dirt
even with dried-on
residues
normal dirt, washed
immediately after use.
Very dirty pans and
residues.
PROGRAM
PROGRESS
Cold prewash
Wash at 45°C
Cold rinse
Rinse at 70°C
Dry
Cold prewash
Wash at 50°C (3)
Rinse at 66°C
Dry
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry
Hot prewash
Wash at 70°C
Cold rinse (4)
Rinse at 70°C
Dry
DURATION
CONSUMPTION
WATER
MINUTES
LITRES
(1)
(2)
15' 3,5
65' 9,5
180' **
90' 11
150' 15,5
POWER
KWh (1)
0,02
1,10
**
1,20
1,70