Application - D-Link DSL-X3052E User Manual

Section 4 - Configuration
Port triggering allows ports to be opened for inbound traffic when
outbound traffic is detected on specified ports . This is used for facilitating
communication between applications and servers behind a NAT firewall. To
access this page, go to Features > Application.
You may create up to 8 application rules. If you wish to remove an application
rule, click . If you wish to edit an application rule, click
If you wish to create a new application rule, click the Add Rule button.
Create New Rule
Name: Enter a name for this application.
Trigger Port Start: Enter the starting port range for the traffic that will be forwarded.
Trigger Port End:
Enter the ending port range for the traffic that will be forwarded.
Select the protocol to trigger this rule: TCP, UDP, or All Protocol.
Trigger Traffic
Protocol Type:
Open Port Start:
Enter the starting port to open once triggered.
Open Port End: Enter the ending port to open once triggered.
Open Traffic Select the protocol to trigger this rule: TCP, UDP, or All Protocol.
Protocol Type:
Click Apply when you are done.
D-Link DSL-X3052E User Manual

Application

A maximum of 8 rules can be defined.
in the Edit column.
68