Table of Contents
Advertisement
Installing expansion cards
There are two kinds of expansion slots available on your system board:
PCI (Peripheral Component Interconnect) and AGP (Accelerated
Graphics Port).
To install an expansion card:
1
Remove the housing panels. Refer to page 38 for more detailed
instructions.
2
Locate an empty expansion slot on the system board.
3
Remove the metal bracket opposite the selected empty expansion
slot by removing the screw that holds the bracket to the housing
then pulling out the bracket.
4
Remove the expansion card from its protective packaging.
5
Align the card in the empty bracket. Make sure that the card is
properly seated.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Advertisement
Table of Contents
