48
6
Insert the new drive into the drive bay and secure it with the two
chassis screws you have previously removed.
7
Connect the power and signal cable to the new drive.
8
Replace the housing panels.
BPL5M hot-swap cage components
The BPL5M hot-swap cage contents box includes the following
components:
•
One hot-swap cage (with backplane board attached)
•
Five hard drive trays
•
One mainboard connector cable
•
Two hard drive fault LED connector cables
Installing the BPL5M hot-swap cage into the housing:
1
Remove the housing panels. Refer to page 38 for more detailed
instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Upgrading your system