Table of Contents
Advertisement
Turning on your system
After making sure that you have set up the system properly and
connected all the required cables, you can now power on your system.
To power on the system, press the power button on the front panel.
The system starts up and displays a welcome message. After that, a
series of power-on self-test (POST) messages appears. The POST
messages indicate if the system is running well or not.
Note: If the system does not turn on or boot after pressing the
On/Off button, go to the next section for the possible causes of
the boot failure.
Aside from the POST messages, you can determine if the system is in
good condition by checking if the following occurred:
•
Power indicator on the front bezel lights up (green)
•
Power, Num Lock, and Caps Lock indicators on the keyboard light
up
•
Power supply power indicator located at the back of the system
lights up (green)
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Advertisement
Table of Contents
