Table of Contents
Advertisement
06 CONNECTING AN EXTERNAL DEVICE
Method 1. Connecting using an HDMI Cable (Capable of Dolby Atmos / DTS:X decoding
and playback)
Pre-connection Checklist
• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
• Make sure that the content supports Dolby Atmos® / DTS:X.
External Device
1. Use an HDMI cable to connect the HDMI OUT port on the external device and the HDMI port on the bottom of the Soundbar.
2. Use an HDMI cable to connect the HDMI IN port of the TV and the HDMI TO TV (eARC/ARC) port on the bottom of the Soundbar.
3. Turn on the Soundbar, TV, and the external device.
4. Press the
(Multi Function) button on the top of the Soundbar or the
2" mode.
5. The Soundbar display indicates that "HDMI 1" or "HDMI 2" mode is currently selected and the Soundbar will start playing sounds.
NOTE
• When you use Dolby Atmos® / DTS:X: If the input source is Dolby Atmos® / DTS:X, refer to
effect modes" on page 7
• When Dolby Atmos® is activated, "DOLBY ATMOS" appears in the front display.
• When DTS:X is activated, "DTS:X" appear in the front display.
•
Open the audio output options on the settings menu of your BD player or other device and make sure that "No Encoding" is selected for
Frame rate (fps)
Color depth
< 60
120
•
HDMI OUT
HDMI IN
(ARC)
8 bit
O
10 bit
-
12 bit
-
8 bit
-
10 bit
-
Top of the Soundbar
OR
HDMI Cable
HDMI Cable
Bottom of the Soundbar
(Source) button on the remote control to select "HDMI 1" or "HDMI
O
-
-
-
-
ENG - 19
HDMI 1
OR
HDMI 2
HDMI 2
HDMI 1
HDMI TO TV
(eARC/ARC)
O
O
O
-
-
O
O
O
-
-
Advertisement
Table of Contents
