Table of Contents
Advertisement
Connecting via Bluetooth
When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one Samsung TV can be connected at a time.
•
The initial connection
1. Press the PAIR button on the Soundbar remote control to enter the "BT PAIRING" mode.
(OR) a. Press the
(Multi Function) button on the top panel and then select "BT".
"BT" changes to "BT PAIRING" in a few seconds automatically or changes to "BT READY" if there is a connect record.
b. When "BT READY" appears, press and hold the
display "BT PAIRING".
2. Select Bluetooth mode on the Samsung TV.
(e.g. Home (
(Bluetooth))
3. Select "Soundbar Q***C" from the list on TV's screen.
An available Soundbar is indicated with "Need Pairing" or "Paired" on the TV's Bluetooth device list. To connect the Samsung TV to the
Soundbar, select the message, and then establish a connection.
• When the Samsung TV is connected, [TV Name
4. You can now hear Samsung TV sound from the Soundbar.
•
If the device fails to connect
• If you have an existing Soundbar (e.g., Soundbar Q***C) on the list of speakers on the Samsung TV, delete it.
• Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the
(Multi Function) button at the top of the Soundbar or the
"BT".
• Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
Top of the Soundbar
BT READY
(Mic On/Off) button on the top panel of the Soundbar for more than 5 seconds to
Top of the Soundbar
BT PAIRING
BT" appears on the Soundbar's front display.
(Source) button on the remote control to select the mode other than
ENG - 15
5 Sec
BT READY" mode to reconnect.
Advertisement
Table of Contents
