Table of Contents
Advertisement
2.2
Detaching the arm/base (for VESA
wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Press the release button, and then detach the arm/base from the monitor
(Figure 1).
•
•
•
•
•
2-4
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
When the panel screen is facing down, be careful not to damage
the Menu (5-way) button
Before the panel screen is face down, the color sensor should be
in the original position, avoid causing damage.
The VESA wall mount kit (100 x 100 mm) is purchased separately.
Use only with UL/CSA/GS Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 13.2 kg (29.11 Ib) (Screw size: M4 x 11
mm).
2
1
.
Chapter 2: Setup
Advertisement
Table of Contents
