Table of Contents
Advertisement
Chapter 4: UEFI BIOS
4.5 BMC
Use this feature to configure BMC settings.
BMC Firmware Revision
This feature indicates the BMC firmware revision used in your system.
BMC STATUS
This feature indicates the status of the BMC firmware installed in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging upon system boot. The options are Disabled
and Enabled.
Erasing Settings
Erase SEL (Available when "SEL Components" is set to Enabled)
Select (Yes, On next reset) to erase all system event logs upon next system boot. Select
(Yes, On every reset) to erase all system event logs upon each system reboot. Select No
to keep all system event logs after each system reboot. The options are No, (Yes, On next
reset), and (Yes, On every reset).
159
Advertisement
Table of Contents
