Working With The Built-In Noise Cancellation Microphone (Selected Models Only); Working With The Noise Filter Speakers (Selected Models Only) - BenQ G Seris User Manual

Working with the built-in Noise Cancellation
Microphone (selected models only)
Check The control panel on page 35
If the video source is via USB-C™ port, you can press the MIC key to turn on the built-in
microphone. Check
With the Noise Cancellation technology, the digital microphone filters out background
noises on your side and transmits only clear vocals. To change the Noise Cancellation
setting, go to Audio > Microphone > Noise Cancellation. See
for more information.
To adjust the volume or change the settings, go to Audio > Microphone. See
page 55 for more information.
To turn off the built-in microphone, press the MIC key again.
MIC LED indicator
Light color
Green
Off
Working with the Noise Filter Speakers (selected
models only)
Check The control panel on page 35
The built-in speakers feature the Noise Filter that help filter out unwanted background
noises from the speakers during online communication. This feature is recommended for
conference calls only.
1. To enable Noise Filter, make sure the speakers have been turned on from Audio >
Speaker.
2. Press the Noise Filter Speaker key to bring up the hotkey menu and set the sensitivity
of the Noise Filter. Select High to reduce as much background noises as possible so
you can hear clear vocals.
for the available controls of the purchased model.
MIC LED indicator on page 42
ON
The microphone is turned on and ready for use.
The microphone is not available.
for the available controls of the purchased model.
for more information.
Noise Cancellation on page 55
Description
42
Microphone on