Loading User Sample Banks - Korg NAUTILUS 61 AT Operation Manual

Sampling (Open Sampling System)

Loading User Sample Banks

Once saved to drive, User Sample Banks can be used much
like EXs. To load a User Sample Bank:
1. Go to the folder in which you've saved your KSC from
"Saving User Sample Banks," above.
2. Select the "[name] UserBank.KSC" file.
3. Press the Load button.
The Load KSC dialog will appear.
4. If you've just saved the KSC that you want to load, set
.KSC Allocation to Clear Sampling Mode Data.
This will unload the data from SAMPLING mode. Data
in User Sample Banks can be loaded either into
SAMPLING mode (for editing), or as a User Sample
Bank (for playback with Virtual Memory), but not both at
the same time.
5. For now, leave the Load Method for EXs and User
Sample Banks set to the default of .KSC Setting.
The automatically-created [name]_UserBank.KSC file
will be set to use Virtual Memory.
6. Press OK to load the User Sample Bank.
That's it! Any Programs, Wave Sequences, or Drum Kits
which used the data from SAMPLING mode will
automatically use the same data from the User Sample
Bank.
Automatic loading at startup
You can use the KSC Auto-Load settings to load samples
automatically at startup, as described under "Automatically
loading sample data" on page 179.
154