Using The Comment Pad - Korg NAUTILUS 61 AT Operation Manual

Set Lists
Bank Map
The GLOBAL > Basic Setup– Basic Bank Map (KORG,
GM(2)) parameter does not affect the reception or
transmission of Set List Program and Bank Select messages.
Save Changes before changing Set List: a
confirmation dialog
If you have edited a Set List, and then do something that
would select a different Set List (including directly changing
the Set List, or wrapping between Set Lists by changing the
Slot), a confirmation dialog will appear. The dialog offers
the option of saving or discarding the edits.

Using the Comment Pad

The Comment Pad devotes the entire screen to the comment
text—convenient for viewing lyrics or longer notes,
especially with larger font sizes.
To show the Comment Pad:
1. Touch the comment area and drag down.
When you touch the comment area, a downward arrow
appears as a hint that this is available.
To close the Comment Pad:
1. Press the large X in the upper right corner of the
window, or press the EXIT button.
To adjust the brightness of the text:
1. Use the three brightness icons in the upper left corner
of the window.
To adjust the size of the font:
1. Use the S/M/L/XL buttons at the bottom of the
Window.
This setting mirrors the Slot's Font parameter.
116
Saving your edits
If you want to save your edits:
1. Press the set list name shown above to give it a new
name if necessary.
2. Select the location to save to using the To Set List
parameter.
3. Press the OK button to save the changes.
The changes will be saved to the specified location, and the
Set List change will proceed.
Discarding edits
If you do not want to save your edits, and just want to
proceed to the new Set List:
1. Press the Discard Edits button.
Canceling the Set List change
If you want to review your edits, and not proceed to the new
Set List:
1. Press the Cancel button.
Graphic EQ
Press the EQ button on the bottom of the display to show a
dialog box for graphic EQ settings that are effective only for
the set list.
This is a nine-band graphic EQ applied to the sound after
TFX2, which tailors the sound from the main stereo outputs
(including the analog L/R outputs, and USB).
You can use this EQ to compensate for the acoustic
environment of a specific club or other performance venue.
All bands are peaking, including the high and low bands.
There is a single graphic EQ setting for each Set List, which
applies to all Slots in the list.