Quick Use Guide (Playback, Recording) - Panasonic Omnivision PV-9401 Operating Instructions Manual

Quick Use Guide
Playback a Tape
1 Make all connections (page 4).
. TV
IN FROM
ANTENNA VHF/ UHF
OUT TO'TV.
Slide the VCR
Channel selector
es switch to the channel
number not used by
local broadcast
Tune your TV to the channel selected above (3 or 4)
whenever you want to see the picture from the VCR
on your TV screen.
3 Play your Tape.
insert a tape.
(a A
m
Press PLAY.
(Start playback)
Record on a Tape
1 Make all connections (page 4).
Back of Model
PV-9451 VCR only
TV
IN FROM VHF/UHF
ANTENNA
OUT TO TV
Slide the VCR
Channel selector
switch to the channel
number not used by
local broadcast
companies (CH3 or 4).
Tune your TV to the channel selected above (3 or 4}
whenever you want to see the picture from the VCR
on your TV screen.
3 Do "One Time VCR Setup" on page 6.
in order for the VCR to properly interface with your
equipment, some setup is necessary.
4 Record on a Tape.
Insert a tape
with Record Tab.
Press CH Up/Down.
(Select Channel)
Press SPEED.
(Select speed)
Press REC.
(Start Recording)
Panasonic Consumer Electronics Panasonic Sales Company,
Company, Division of Matsushita Division of Matsushita Electric of
Electric Corporation of America Puerto Rico, inc. ("PSC")
One Panasonic Way Secaucus, Ave. 65 de Infantería. Km. 9.5
New Jersey 07094 San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Printed in Japan
VQTS3515A