Table of Contents
Advertisement
Head Cleaning
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Video Head Clog Sensor
During playback this
screen appears if
clogging is detected.
To remove screen,
press PLAY on the
remote or VCR.
VIDEO HEADS MAY
NEED CLEANING
PLEASE
INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END:PLAY
KEY
Use "dry" type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
—
Cleaning Tape
|
* Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
If head clog symptoms persist, contact your
nearest Factory Service Center or authorized
Service Center. (See page 38.)
Cleaning the VCR
Use a soft cloth or dusting attachment of
your vacuum cleaner to dust your VCR.
Remove dust from the ventilation holes on
the back sides and bottom of the cabinet.
Plastic surfaces are easily scratched and
can be marred by alcohol and various
solvents. Avoid excessive use of oil-based
furniture polishes since the materials used
in the cabinet will accumulate more dust.
We recommend using a nonabrasive,
antistatic cleaner and polisher.
Specifications
Power Source:
120V AC, 60 Hz
Power Consumption:
Power On
Approx. 18 watts (PV-9401)
Approx. 23 watts (PV-9451)
Power Off
Approx. 3.3 watts
Video Signal:
EIA Standard NTSC coior
Video Recording System: 4 rotary heads helical
scanning system
Audio Track:
1 track (Normal)
2 channel (Hi-Fi Audio Sound)
(PV-9451)
Tuner:
Broadcast Channels:
VHF 2~13, UHF 14-69
CABLE Channets:
Midband A through | (14-22)
Superband J through W (23~36)
Hyperband AA~EEE (37-64)
Lowband A-5~A-1 (95-99)
Special CABLE channel 5A (01)
Ultraband 65~94, 100~125
Operating Temperature:41°F~104°F (5°C~40°C)
Operating Humidity:
10%~75%
Weight:
7.7 ibs. (3.5 kg)
Dimensions:
14-15/16" (W) x 3-2/3" {H} x
12-3/16" (D)
380 (W) x 93 (H) x 310 (D) mm
Note:
Designs and specifications are subject to change
without notice.
Features for a Quality Picture
Digital Auto Picture
Automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts tor
optimum picture quality.
Manual Tracking Control (to reduce picture noise)
Use during Playback and Slow Motion mode
to reduce picture noise. To return to Auto Tracking,
press POWER off, then on again.
<
O
J
Ro
e
y
T
Y
O
ms
D
=]
mh
O
=
3
D
=
je)
5
V-Lock Control
(to reduce
picture jitter
In Still mode, CH (TRACKING) A/¥ operate as
a V-Lock control.
35
Advertisement
Table of Contents
