Using The Accessories - Electrolux KDFCC00K User Manual

Built-in double oven
Hide thumbs Also See for KDFCC00K:
Table of Contents

Advertisement

6. Press
or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal sounds for
2 minutes. The display shows flashing
and time setting. The oven turns off.
7. Press a sensor field to stop the signal.
8. Turn off the oven.
7.4 How to set: End Time
1. Set a heating function and temperature.
2. Press
again and again until
to flash.
3. Press
or
press
. First you set the minutes and
then the hours.
When the set time ends, the signal sounds for
2 minutes. The display shows flashing
and the time setting . The oven turns off
automatically.
4. Press a sensor field to stop the signal.
5. Turn off the oven.
7.5 How to set: Time Delay
1. Set a heating function and temperature.
2. Press
again and again until
to flash.
3. Press
or
Duration.
4. Press
.
5. Press
or
Duration.
6. Press
.
The display shows flashing
7. Press
or
press
. First you set the minutes and
then the hours.

8. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
12
ENGLISH
starts
to set the End Time and
starts
to setthe minutes for
to set the hours for
.
to set the End Time and
The oven turns on automatically later on,
works for the set Durationand stops at the set
End Time. When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing
and the time setting . The oven
turns off automatically.
8. Press a sensor field to stop the signal.
9. Turn off the oven.
When the Time Delay function is turned
on, the display shows a symbol of the
heating function,
The dot shows which clock function is on
in the Clock / residual heat display.
7.6 How to set: Minute Minder
1. Press
.
The display shows flashing
2. Press
to switch between options. First
you set the seconds, then the minutes
and the hours.
3. Press
or
and
to confirm.
4. Press
or the Minute Minder starts
automatically after 5 seconds.
When the set time ends, the signal sounds for
2 minutes and the display shows flashing
00:00 and
.
5. Press a sensor field to stop the signal.
7.7 How to set: Count Up Timer
1. To reset the Count Up Timer press:
and
at the same time .
2. When the display shows "00:00" the
Count Up Timer starts to count up again.
8.1 Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
devices. The high rim around the shelf
prevents cookware from slipping off the shelf.
with a dot and
.
and "00".
to set the Minute Minder

Advertisement

Table of Contents
loading

Table of Contents