Park Lock Emergency Release - Ferrari 812 competizione A 2024 Owner's Manual

Once the electric parking brake has been released manually, at the next
key-on, an error code is generated by the EPB node and the specific
symbol and the relative message are displayed on the left hand TFT
display: "Parking Brake system revision. Go to dealer".
Warning
If access to the screws C is obstructed by a wheel spoke, the wheel must
be removed.
The EPB release procedure is irreversible and compromises the
functionality of the parking brake.
Take the vehicle to a service centre to have the EPB system reset and
have any errors cancelled from the fault memory.
Then take the vehicle to a F
the EPB system checked.
For safety reasons, the reset procedure is mandatory.
Towing the vehicle
46
C
S N centre to have
ERRARI ERVICE ETWORK

Park Lock emergency release

Warning
The emergency release procedure must only be carried out by
specialised workshop technicians. If the system cannot be released,
contact the nearest F S
ERRARI ERVICE
Warning
This should be avoided unless absolutely necessary:
- to tow the vehicle;
- if there is a Park Lock failure (displayed on the left TFT display with
the message "Only manual unlock gearbox allowed: See handbook").
Warning
When the Park Lock safety device is deactivated manually, the vehicle
may move unexpectedly. The vehicle is only kept stationary by the
parking brake, if applied.
The Park Lock manual emergency release device is found in the top right
of the tool kit, as shown by the arrow in the figure.
To perform the Park Lock emergency release procedure, do the following:
●
Select the wrench D from the tool kit.
C .
ENTRE