Rear Panel - Pace ND7506 User Manual

REAR PANEL

TELEPHONE OUT
For future use
RESET CABLE IN
For restarting From cable
your set-top
service-provider
RESET
TELEPHONE OUT
CABLE IN
ETHERNET
VIDEO / AUDIO OUT
(green socket)
VIDEO / AUDIO OUT
(yellow socket)
DIGITAL AUDIO OUT
HDMI OUT
HMDI IN
USB
SATA
POWER
ETHERNET
For connection to
a home network
VIDEO / AUDIO OUT
Component video
output for analog HDTV
VIDEO / AUDIO OUT
Combined composite
video and stereo audio
output for analog SDTV
Press and hold for four seconds to restart your set-top.
For future use.
Connect the cable service here.
Connect your set-top box into an Ethernet home network (optional).
If your HDTV does not have an HDMI connector, but has component video (YPbPr) inputs, connect your HDTV here.
In order to hear sound you must also connect an electrical audio cable between the DIGITAL AUDIO OUT socket on
the set-top and the audio input sockets on your HDTV.
Combined standard-definition (SD) video and stereo audio output. Connect to the composite video and analog
audio inputs on your SDTV.
Connect to the electrical digital audio input on optional digital audio equipment, such as an audio decoder or home
theater receiver.
Connect to the HDMI input on your HDTV.
Connect another optional
HDMI
Connect to compatible optional equipment that supports a USB interface (for future use).
Connect to an optional external hard disk (if this feature is enabled by your cable service-provider).
Connect your set-top box's power supply unit here. Make this connection last of all.
HDMI OUT
HDMI video and
audio output
HDMI IN
HDMI video
®
and audio input
DIGITAL AUDIO OUT
Electrical S/PDIF audio
output
device (allowing the device's output to loop through the set-top box to the TV).
ND7506 USER GUIDE
USB
For connection
to USB device
SATA
For connection to an
external hard disk
POWER
(Make this connection
last of all)
6