Advertisement
Quick Links
Advertisement
Related Manuals for Breville Paradice 9
Summary of Contents for Breville Paradice 9
- Page 1 Paradice ™ Instruction Book - BFP638 Scan for 3D interactive set up...
-
Page 2: Table Of Contents
BREVILLE ® Contents RECOMMENDS SAFETY FIRST 2 Breville Recommends At Breville we are very Safety First safety conscious. We 2 Limited Product Warranty design and manufacture 8 Components consumer products 11 Assembly with the safety of you, 14 Functions our valued customer, 15 Tips foremost in mind. - Page 3 and free of water, flour, • To unplug, grasp the plug etc. Vibration during and pull from the outlet. operation may cause the Never pull from the power appliance to move. cord. • Handle the food • Always secure the processor and processing bowl onto attachments with care...
- Page 4 • Ensure the motor, cause the processing blades or discs have blade to rotate more completely stopped slowly than normal. If this before disassembling. happens, do not process for longer than 1 minute. • Ensure the OFF button Allow the appliance to has been pressed and cool down before next unplugged from the...
- Page 5 • Fully unwind the power entire appliance to the cord before use. nearest authorised • Do not let the power Breville Service Centre cord hang over the edge for examination and of a table, counter, touch /or repair. hot surfaces or become •...
- Page 6 • This appliance is for an external switching household use only. Do device, such as a timer, not use this appliance or connected to a circuit for anything other than that is regularly switched its intended use. Do not on and off by the utility. use in moving vehicles •...
- Page 7 To protect against electric shock or fire, do not immerse the power cord, power plug or appliance in water or any other liquid. The symbol shown indicates that this appliance should not be disposed of in normal household waste. It should be taken to a local authority waste collection centre designated for this...
-
Page 8: Components
Components A. Small pusher cap The small pusher cap functions as a cover of the smaller feed chute. B. Small food pusher For improved processing control of smaller ingredients. It also doubles as a measuring cup. The food processor will run continually whether the small pusher is in or out. - Page 9 1. Dicing Blade To be used with the dicing grid for dicing in cubes. 2. Dicing Grid To be used with the dicing blade for dicing in cubes. 3. Dicing Cleaner Use to clean dicing grid. 4. Main Spindle Attaches to blade or discs. 5.
- Page 10 DETACHMENT OF ACCESSORIES • Accessories all have a place in the caddy which has been color coordinated. • All accessories can be accessed independently of each other.
-
Page 11: Assembly
Assembly BEFORE FIRST USE ASSEMBLY • Before using your food processor for the first Motor Base and Bowl time, remove any packaging material and promotional labels. Ensure the POWER button is 1. Position the processing bowl onto the motor OFF and the food processor is unplugged. base with the handle in line with the ALIGN HANDLE graphic on the motor base. - Page 12 Spindles and Discs Spindle and S Blade 1. Carefully insert the S blade into the WARNING spindle and turn clockwise until it is firmly locked in place. Do not touch the blades of the 2. Place the assembled spindle and S blade over Dicing Grid and Dicing Blade.
- Page 13 Spindle and Dough Blade 1. Insert the dough blade into the spindle and Place lid onto the processing bowl. To LOCK the turn clockwise until it is firmly locked in place. lid, hold the chute and turn clockwise so that the handle parts align.
-
Page 14: Functions
Functions OPERATION After Processing Wait until the blades or discs have stopped Getting started moving before unlocking the lid. Ensure that the unit has been turned off using the POWER button The food processor will only operate when the and unplug from the power outlet before handling processing bowl, lid and large pusher are correctly the blades. -
Page 15: Tips
Tips Tips listed below are suggestions only. For more detailed instructions, refer to specific recipes provided online at breville.com ACCESSORY ACTION TYPES OF TIPS INGREDIENTS / DISHES S Blade™ Chop • Raw fruits and vegetables • Trim and cut food, if necessary, into 2.5cm cubes before processing. - Page 16 Reversible Coarse and • Cheeses • For best results, freeze softer cheeses Shredding Disc Fine Shred for 45 minutes before grating. • Fruits and vegetables such as apples, potatoes, and cabbage NOTE Grating soft white cheeses such as fresh mozzarella is not recommended. •...
-
Page 17: Care & Cleaning
Care & Cleaning Remove the power cord from the power outlet after Dicing gearbox and accessory caddy use for safety reasons. Dicing gearbox and accessory caddy (if needed) should only be hand washed. Processing bowl and lid Blades and discs Due to the interlock components, we do not recommend immersing the bowl and lid in water •... - Page 18 Cleaning the Dicing Grid Motor base To clean the motor base, wipe with a soft, damp NOTES cloth then dry thoroughly. Wipe any excess food particles from the power cord. • Ensure dicing blade has been removed first. Cleaning agents •...
-
Page 19: Troubleshooting
Troubleshooting PROBLEM EASY SOLUTION Food is unevenly • Ingredients should be cut evenly into 2.5 cm pieces before processing. processed • Ingredients should be processed in batches to avoid overloading. Slices are slanted • Apply even pressure on the pusher. or uneven Food falls over •... - Page 20 PROBLEM EASY SOLUTION The motor slowed down • This is normal as some heavier loads (e.g. slicing / shredding cheese) may require during operation the motor to work harder. Reposition the food in the feed chute and cut the food into smaller sizes and process using a smaller pusher and continue processing.
- Page 21 ATTACHMENT OF CADDY COMPONENTS Attachment of caddy only after all the accessories have been removed. Refer to this instructions for: • If dropped and fallen apart. ATTACHMENT Blade Clips WARNING 1. Locate correct side of caddy (dough blade or chopping blade) and correct blade clip. Do not touch the blades of the 2.
- Page 22 ATTACHMENT Detachment Spindle Sheath 1. Remove all accessories and flip caddy 1. Remove all accessories from caddy. upside-down (WARNING! Blades are sharp). (WARNING! Blades are sharp). 2. Slide sheath downwards into guide ribs. 2. Press the release button and slide the dicing Press further until clip is locked into position.
- Page 23 Notes...
- Page 24 Web: www.breville.com www.breville.com Breville, the Breville Logo, Barista Express and Temp Control are trademarks of Breville Pty Ltd (“Breville”) and Breville's products are distributed in Australia and New Zealand under license. Copyright Breville Pty. Ltd. 2023. Due to continued product improvement, the products illustrated/photographed in this brochure may vary slightly from the actual product.