Advertisement
WARNING
energy.
* Do not place your hands into any suspected microwave radiation field unless the safe density level
is known.
Procedure
A) Prepare Microwave Energy Survey Meter, 600cc glass breaker, glass thermometer 100°C or 212°F.
C) Place it at the center of the tray and set it in a cavity.
D) Close the. door and operate the oven.
E) Measure the leakage by using microwave energy survery meter with dual ranges, set to 2,450 MHz.
—When measuring the leakage, always use the
2 in (cm) space cone with probe. Hold the
probe perpendicular to the cabinet, door.
Place the space cone of the probe on the
door, cabinet, door seam, along the seam,
the door viewing window, the exhaust air
vents, the suction air vents.
—Measuring should be in a counter-clockwise
direction at a rate of 1 inch/sec. If the leak-
age of the cabinet door seam is unknow,
move the probe more slowly.
—When measuring near a corner of the door,
keep the probe perpendicular to the areas
making sure the probe end at the base of
the cone does not get closer than 2 inches
from any metal.
lf it does, erroneous reading may result.
22
Advertisement
