Section 8-Arms; Removing/Installing/Adjusting Arms; Removing/Installing; Adjusting Arm Width - Invacare HMV 300 Owner's Operator And Maintenance Manual

SECTION 8—ARMS
SECTION 8—ARMS
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power OFF and
remove key from ignition.

REMOVING/INSTALLING/ADJUSTING ARMS

NOTE: For this procedure, refer to FIGURE 8.1.

REMOVING/INSTALLING

NOTE: Reverse this procedure to install the arms.
1. Loosen adjustment knob that secures the arm to the arm support bracket.
2. Remove the adjustable width arm from the arm support bracket.
3. If necessary, repeat STEPS 1-2 to remove the remaining arm.
Arm
Arm Mounting Tube
Adjustment Knobs
Arm Support Bracket
FIGURE 8.1 - REMOVING/INSTALLING/ADJUSTING ARMS

ADJUSTING ARM WIDTH

NOTE: Changing the width of the arms may also effect the overall width of the powered scooter.
Use caution when traveling through doorways as the width may have increased.
1. Loosen the adjustment knob located beneath the seat frame on the arm support
bracket. Refer to FIGURE 8.1.
40
300 and 400 Part No. 1118395
Download from Www.Somanuals.com. All Manuals Search And Download.