Table of Contents
Advertisement
Installation
Installing the Recirculation Kit
NOTE
Same process until No. 14
Duct Cover Mounting Bracket
Deflector
Assembly
screws
A
B
C
D
18 English
1.
Assemble the air deflector with the
duct cover mounting bracket with the
four assembly screws provided with
the Recirculation Kit.
NOTE
• Use of recirculation type hoods in closed
spaces may cause poor ventilation
performance.
• Please ventilate the room by opening
the windows while operating the device.
2.
Measure from the bottom of the deflector
to the bottom of the hood outlet.
3.
Cut the duct to the measured size "X."
4.
Remove the deflector.
5.
Slide the duct onto the bottom of the
deflector.
6.
Place the assembled deflector and duct
over the exhaust outlet from the hood.
7.
Reassemble the air deflector to the duct
cover mounting bracket with the four
assembly screws.
8.
Seal the connections with tape.
A
Deflector
X = length to cut
B
duct
C
Duct
D
Exhaust outlet
Electrical Connection
WARNING
Assembly and electrical connections must be carried out by qualified technician.
WARNING
WARNING
Electrical Shock Hazard
Electrical Shock Hazard
Turn off power circuit at the service panel before wiring this unit.
Turn off power circuit at the service panel before wiring this unit.
120 VAC, 15 or 20 Amp circuit required.
120 VAC, 15 or 20 Amp circuit required.
Failure to do so can result in death or electrical shock.
Failure to do so can result in death or electrical shock.
Connect ground wire to Green/Yellow ground wire in terminal box.
Connect ground wire to Green/Yellow ground wire in terminal box.
To protect you against electric shock, The Green/Yellow Wire must
To protect you against electric shock, The Green/Yellow Wire must be
be connected to the grounding wire in home electrical system.
connected to the grounding wire in home electrical system.
Failure to do so can result in death or electrical shock.
Failure to do so can result in death or electrical shock.
It must under no circumstances be cut or removed.
It must under no circumstances be cut or removed.
Advertisement
Table of Contents
