Other Events; Security Alarm - Honeywell NOTIFIER N16 Instruction Manual

Operations

4.8 Other Events

Events listed as Other are as follows:
– CO Pre-Alarm (blue)
– Critical Processes (yellow)
– Security (blue)
– Pre-Alarm (red)
– Hazard/Weather Alert (Yellow)
NOTE: When more than one of these conditions have been activated, they will be listed in order of priority. CO-Pre Alarm will be listed first,
followed by Critical Processes, Security, Pre-Alarm and Hazard/Weather Alert.
Responding to an Other Event:
• The Informational Text Area on the screen will indicate step by step what needs to be done to acknowledge and silence the event.
• Tap on the
ACKNOWLEDGE
mark will appear next to the acknowledged event.
•
BLOCK ACKNOWLEDGE
• Tap on the
SILENCE
silenced.
• Once all the events have been acknowledged the blue highlight indicator will move from the
touchpoint.
• Tap for a latched event.
RESET
64

SECURITY ALARM

Step 1 Acknowledge each event. This is secondary text to explain what acknowledging an event means and who should do it.
FIRE ALARM
UNACKNOWLEDGED SECURITY ALARMS(1)
SECURITY ALARM
CO ALARM
SECURITY L
SUPERVISORY
TROUBLE
DISABLE
1
OTHER
SIGNALS
SILENCED
Figure 6 Other Event Screen
touchpoint located in the Header Bar. The acknowledge touchpoint will be highlighted in blue. A check
allows for multiple events to be acknowledged at once.
touchpoint located in the Header Bar. The
Ack Silence
First Floor, Guest Room
Zone Z553 (Z553)
icon in the Alert Bar will illuminate yellow once the N16 is
SILENCE
N16 Instruction Manual P/N LS10239-000NF-E:A 04/20/2021
Thu 2/22/20
1:38:06PM
Reset
Thu 02/22/18
1:52:57 PM
NO25L01M011
touchpoint to the
ACKNOWLEDGE
Other Events
SILENCE